How To Make Your Electric Razor Last Longer?

There are plenty of things that can go wrong with an electric razor, but most of the time, it’s easy to fix. If you’re not sure how to make your electric razor last longer, don’t worry! We’ve got you covered. Just follow these easy steps and make sure to do some basic maintenance on your device at least once every six months.

Basic troubleshooting:

Check the voltage level of the device with a multimeter. If it’s below 100 VAC, replace it immediately.
Disassemble your electric razor and clean the blades using warm soapy water and a toothbrush or brush.
Check the power cord and make sure it’s not frayed or damaged.
Unplug your electric razor and dry it with a dry cloth.

Removing hair shouldn’t be a pain, but all too often, it is — especially when you’re dealing with an electric razor that doesn’t seem quite to do its job correctly. Several things you can do to make sure your razor lasts for years to come — as long as you’re committing to a regular maintenance routine and making sure to do some basic troubleshooting each time something goes wrong.

Here are a few tips that might help:

Don’t run the razor over the same part of your skin more than three times. Doing so can cause breakouts and irritation.
Cover glasses or contacts them with a towel or removing them before using an electric razor.
If you’re getting red bumps after shaving, ensure that you’re not repeatedly running your razor over the same area.
Lower the pressure on your razor by using it on a lower setting — typically numbers two or four instead of one or three.
Try applying some shaving cream, soap, or gel before using your electric razor.

Things to avoid:

Make sure you’re doing some basic maintenance on your electric razor at least once every six months.
Don’t use the hair comb attachments as this can cause additional damage to the blades.
Don’t allow others to use your razor as they might not take good care of it or understand its maintenance requirements.

Take notes or keep a log of any issues you have with your electric razor and address them right away.
If you notice yourself getting irritated after shaving, try using a different product or changing up your shaving routine.

If you want to make your electric razor last longer, there are a few different things that you can do to ensure that it works as hard as possible every time you use it.

1. Extend The Life Of Your Razor Blade By Using Gel Instead Of Cream.

Using gel instead of cream will increase the life of your razor blades because there is less friction between them and your skin. When you use shaving cream when shaving, you are likely to shave more slowly because shaving cream tends to collect around the blades while they are in use, leading to more pressure being applied by the user to make sure all of the hair is cut off at once.

It isn’t that different to save yourself from applying shaving cream because you can use your shower gel or facial wash. This will have the same effect as cream, and it is almost completely free! 2. Check Your Razor Blades Regularly.

If you want your razor to last longer and work as hard as possible, simply check the condition of your razor blades every time you shave and ensure that they aren’t bent, broken, or frayed in any way. This will ensure that they are working as new and that your razor is running efficiently.

  1. Shave With The Proper Direction For Your Skin Type.

If you want to save a lot of time when shaving, you should use the correct direction for your face or leg hair. When shaving, try to keep your blades in contact with the skin as much as possible rather than moving them side to side because this will cause the hair being cut off of your skin to move in one direction, which is why it can get cut off more easily than it would have if you were shaving with the proper direction for your skin type. 4. Rinse Your Razor Blades Before You Store Them To Keep Them From Getting Stale.

It is a smart idea to rinse your razor blades before you put them away because the longer they stay in your drawer, the more likely it will be for them to start smelling. If you don’t rinse your blades, they will start growing bacteria from the lipids and oils that can be left on them by skincare products. This can become a huge problem for anyone who uses their razor blades frequently because it can lead to infection and discoloration of the skin.

  1. Clean Your Razor Blades Regularly.

When cleaning your razor blades, you should always make sure to clean them after every use. This is the only way to extend the life of your razor blades because if you want to clean them regularly and make sure that they are in the best condition possible, it will be impossible to do so if you don’t take care of them regularly.

  1. Clean Your Razor Handle Regularly.

If your electric razor handle is dirty, nasty, and full of gunk and oil regularly, it will be extremely difficult for your razor blades to work properly when they are being used. If they can’t work properly, they will not have the ability to work hard enough to cut all of the hair off at once. This can lead to irritation as well as awkward skin bumps and lumps. 7. Keep Your Razor Dry When Not In Use To Keep It From Rusting.

When you allow your razor blades to remain wet for an extended time, they can rust. This means that they will not be able to cut your hair off at all, and you will have no choice but to replace them with a new one if this happens. It is best to take care of your razor blades by drying them and storing them in a dry place when they are not in use.

  1. Avoid Using Oil-Based Products When Using An Electric Razor.

If you want to keep your electric razor working as hard as possible, you mustn’t use oil-based skincare products on your skin or in the area where you have shaved. This can cause the hair on your face or legs to stick around the blade for longer and cause many problems for you because this can lead to skin bumps, lumps and irritation if it happens often enough.

How To Take Care Of Your Electric Razor?

There are some simple solutions to your electric razor, don’t take it for granted.

Tips for maintaining a good quality of your electric razor:

Use a clean and new shaving head at least every six months (as per the manufacturer’s recommendation).

To remove stubborn hair from the blades, you can gently scrub them with warm soap and water. Never use high-pressure detergent. Never try to open the head of your electric razor with any tool or screwdriver; it will cause damage. The cleaning process will not be thorough and successful if you try to open it up. If you use a rechargeable dry and wet shaver, always unplug before cleaning or replacing these shaving heads.

How to Cleaning your electric shaver?

Tips for maintaining a good quality of your electric razor:

  1. Use a clean and new shaving head at least every six months (as per the manufacturer’s recommendation). To remove stubborn hair from the blades, you can gently scrub them with warm soap and water. Never use high-pressure detergent. Never try to open the head of your electric razor with any tool or screwdriver; it will cause damage. The cleaning process will not be thorough and successful if you try to open it up. If you use a rechargeable dry and wet shaver, always unplug before cleaning or replacing these shaving heads.

2. Regularly clean the trimmer/combo blade.

If you have a foil, rotary, or pop-up shaver, use lemon and olive oil to clean it regularly.

  1. Ensure that your shaver’s chord is fully extended before connecting it to a power source. If the cord is not fully extended in both directions, the head will not make full contact with your skin, and the shaver will not function correctly.
  2. Remove the shaver head before allowing it to dry completely. If the shaver is still wet, mold and bacteria can develop in the unit.
  3. Don’t allow electricity to come in contact with your skin or hair while the power cord is plugged in.
  4. Don’t use a lubricant on your head. It will damage it over time. Replace them every eight months if you follow this advice, and do not store them in a damp or wet area of your home, such as under a sink or near water (unless you have a drying system).
  5. Don’t allow water to contact the shaver head; always dry the shaver head after each use.
  6. Don’t leave your shaver on for extended periods. It will strain the rechargeable battery and eventually cause failure.
  7. The cleaning process is not necessary when using a dry and wet shaver; remove it from the shaving unit to clean if you are using a foil or rotary shaver. Never use antiseptic solutions while cleaning your razor.
  8. If you want to keep the rust away, clean it regularly (at least once a month).
  9. If your shaver features a cleaning system, it is always necessary to clean it thoroughly and then lubricate it using your regular lubricating solution.
  10. Check the entire shaver once a day for signs of damage, rust or wear and tear.

Instructions for cleaning/drying and lubricating

  1. Rinse the shaver under warm water after each shave. If you have used shaving cream foam or gel, you can run water over the head without turning on the shaver itself: try to shake it dry as much as possible before running water over it.
  2. Dry your shaver with a clean towel.
  3. Lubricate the shaving head with your regular shaving cream or gel.
  4. Recharge your shaver, as per the manufacturer’s instructions.
  5. Store your shaver in a dry place (not under a sink or near water). Make sure to place it on its stand when not in use; this will prevent accidental damage while it is not being used.
  6. If you use a foil or rotary shaver, you can remove it from the razor and then clean it with warm water and a mild soap without removing the protective foil.
  7. If you are using a pop-up shaver, remove it from the razor and then clean it thoroughly with warm water and a bar of mild soap without removing the protective foil.
  8. Before putting your shaver back in its holster, ensure that you have removed all of the hair you have cut off.
  9. . Do not submerge your shaver into water.
  10. Don’t allow the razor to come in contact with your skin; do not wet it.
  11. Remember, a wet shaver can become damaged if left on for too long; dry shave using a dry towel, or simply leave it to dry naturally once you have finished shaving or put it back in its holster until you are ready to use it again.

If you want to keep your electric razor working as hard as possible, avoid using oil-based skincare products on your skin or in the area where you have shaved, and make sure that you follow all of these instructions before replacing them (once they start getting damaged). That being said, while you are replacing your blades and heads (every six months or so), make sure also to replace the oil on your foil, rotary, or pop-up shaver shaving head (to keep it in good working order and prevent damage).

Always check your electric razor’s power points before using it. The power points are where you plug in the cord that is attached to your shaver. If you find that the PowerPoint is damaged or cracked, you must immediately replace it with a new one. Some razors have a special device that pops out of their shaving head from time to time.

Leave a Comment